The New Version 2 Twin Tank Has Arrived

Changes from the V1:

Tanks now mounted on studs to eliminate hardware on the sides of the enclosure.
Enclosure raised to allow bottom tapping of tanks.
Tubing/Electrical openings on both ends of the enclosure for greater mounting options
Dedicated tapped insert for relay mounting
Wider tank viewing slots.
And many other improvements.

System Pricing:

1) Basic Unit - $269
2) Complete - $299

This unit is available in two configurations:

1) Basic Unit :
PN HE310 : Enclosure, Pump Bracket, Tanks and Hardware.
(You will need to provide tank adapters of your choosing)

2) Complete Unit :
PN HE312 : Enclosure, Pump Bracket, two tanks and tank adapters with integrated filters

Configuration

Basic Unit $269.00 Complete Unit $299.00

Color

Black Powdercoat Bare Aluminum

System Dimensions 12.25" Long, 9" Wide, 11.25" tall without caps.

A picture of the two tank adapters installed in the bottom of the tanks. These special adapters allow compression fittings to be used at right angles to the tank. This allows the most secure tubing connections and a low profile installation for bottom-tapping of tanks.

The two tank adapters assembled outside the tanks. The flow-thru right angle design allows tapping of multiple tanks on the same run of tubing with secure compression fittings.

Optional Accesories:

LED lighting for the tank. This consists of an LED light strip that can be wired into your trunk light. When you open the trunk the LED will illuminate the fluid in the tank. LED lighting kit is $29.

Coolling Fan. This is only used as a precautionary measure when running the pump continuously, 3-5 minutes at a time or longer. Moves air through the enclosure to keep the pump from overheating and stop on a thermal interrupt. Wires to the pump leads so it only runs when the pump is running. Extra quiet dual ball bearing fan, rated at 20dBa. Cooling Fan kit is $20