Here you will find information pertaining to legacy systems.

Aquamist HFS-5

The HFS-5 is designed to be integrated with stand-alone EMS systems. Similar to the 2c system, this was once sold as a self-contained system, but is now in the lineup for EMS integration. With the best failsafe system in the industry, and a standard 13ohm injector to be driven by a spare PWM channel from your EMS, the HFS-5 easily integrates into nearly any application.

HFS-5 Manuals

Aquamist HFS-1

The HFS-1 is geared towards light-pressure turbo applications and low-boost stock vehicles. Vehicles with smaller turbo's typically have a higher peak boost pressure in the midrange with boost tapering off at high RPM's. The fixed injection rate of the HFS-1 suits this application perfectly, and with the best failsafe system in the industry, is a great choice .

Tech Info Here

Aquamist 2d

The 2d system's injection mapping is similar to the HFS-5 and HFS-6 systems. The system uses IDC tracking and mirrors this signal with a HSV to control injection. An adjustable pressure switch determines the system's injection start point.

Aquamist 2c

The 2c is designed for stand-alone EMS systems. This system has been used by top Works WRC teams in the World Rally Championship. The system provides a pre-pressurized water line up to 8 bars and the flow rate is metered by a High Speed Valve (HSV). The inline valve is made of high grade stainless steel and capable of achieving a cycling rate of over 250Hz.

Tech Info Here

Aquamist 2s

The 2s is a fully-mappable water-injection system, is pre-pressurized , equipped with diagnostic circuitry, able to detect blocked water-jet and abnormal operation problems.

Tech Info Here

Aquamist 1s

The 1s is a single stage system that consists of an ERL high-pressure electro-magnetic water pump, adjustable pressure switch, plus all the necessary hardware to form the basis of a starter kit.