Aquamist Special Fittings -
Jump To:

AN Lines - Wire Management

HE160

MAC Valve $49.00

MAC Valve, PN 36A-AAA-JDBA-1BA
with barb fittings on each port.

You can choose any combination of fittings from the drop down.

HE110

Aluminum Weld Bung $12ea

Aluminum weld bungs for fitting to aluminum manifolds or piping.

HE111 $55

4-Port Distribution Manifold

4 port manifold with compression fittings installed. 6mm inlet and 4mm outlet, with a plug in the end. We can configure this unit any way needed. For example, we can substitute another compression fitting for the end plug to fit a gauge

Comes as shown, contact us for other configurations.

HE112 $70

6-Port Distribution Manifold

We can configure this manifold numerous ways. We can substitute plug for outlet fittings, add a gauge to the end etc. Please contact us with your application

Comes as shown, contact us for other configurations.

HE113 $80

8-Port Distribution Manifold

We can configure this manifold numerous ways. We can substitute plug for outlet fittings, add a gauge to the end etc. Please contact us with your application

Comes as shown, contact us for other configurations.

From Left to Right:
Jet adapter, Cluster inlet, Cluster Outlet, Pump Block Outlet Adapter

HE100

AN Fittings HFS-6 $65.00

We have commissioned fittings of the highest quality (nickel plated brass) to be able to run AN lines from the outlet of the pump all the way through the jet. In the HFS-6 package you will receive 4 fittings, each listed under the picture to the left.. The construction of these fittings ensure that they will be unaffected by any concentration/mixture of water and methanol.

From Left to Right:
Jet Adapter, Flowmeter Outlet, Flowmeter to HSV Fitting, HSV Inlet, Pump Block Outlet Adapter

HE101

AN Fittings - HFS-5 $79.00

Constructed the same as the HFS-6 fittings above, these will allow you to run AN lines though the pressure side of the system. You get five fittings for the HFS-5 kit, listed under the picture to the left. The HSV Inlet fitting has the restrictor orifice built into the fitting (comes with .5mm hole drilled). Please tell us what restrictor size you are running and we can drill the appropriate size hole before shipping your fittings.

From Left to Right:
Pump Block Outlet Adapter, Flowmeter Inlet, Flowmeter Outlet, HSV Inlet, HSV Outlet

HE102

Compression Fittings - HFS-5 $49

These fittings were part of the development program for the standard compression fittings in the HFS-6 kit. With higher concentrations of Methanol, some push-to-connect fittings can weep. These fittings ensure a proper seal regardless of the fluid concentrations used. The HSV inlet fitting has an integrated restrictor installed with a .5mm orifice. Please let us know at the time of purchase what restrictor size your application requires and we can pre-drill the restrictor for you.

AN Lines and Fittings

We are a bulk supplier for Fragola and Earl's. Please email us about your project or AN needs and we will be happy to help you out.

We offer -3AN and -4AN line and fittings for most Aquamist applications. We also stock -6AN parts and lines for the suction side of the pump.

Pictured Left: Black -4AN line and -4AN Steel braided with black fittings.

Please Email us for pricing.

Wire Management - Split Loom Products

Wire Management Products

TechFlex Wire Braid Split Loom:

Available in 1/8",1/4", 1/2"

Corrugated split loom 1/2"

Heat Sheild 1/2" (Fiberglass with Foil Cover)

All Sizes, All Types - $1.00 per foot